Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as timber and aluminum.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good repair.

Single-pane windows are relatively easy to replace and generally fit into frames that were previously in use very easily. However when you have double-pane windows that are anchored by internal beading it will be more difficult to take out the existing panes and install new ones. In this case you'll need to find some plastic spacers that will aid the new pane in being able to fit properly into the frame of the window.

If you plan to try to remove the window panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled.

It's a great idea to seal the gap after the glass has been removed. This will keep drafts and water from entering your home until a professional is able to repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you may think about the security door with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. As time passes, they may develop a number of problems such as sliding. A sagging window can cause problems with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows so you can access the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and verify the an appropriate fit. If you're satisfied with the fit, tighten the screws until they remain in the right place.

If you can't reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it could also be caused by the handle mechanism wears out. It's fairly simple to repair a loose uPVC handle. First, you'll need close the window and perform an experiment to ensure that it fits. The joint at the corner of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the problem the caulking used previously may require removal before a new layer is applied. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The mold thrives in damp environments and can quickly spread throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. It is also possible to be fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with a breeze, it may be the hinges that are at the fault. They can be easily repaired by any skilled DIYer and can be done within a few minutes.

Like any mechanical part, hinges can wear out over time. It is essentially a very simple process, but it's easier with someone else to assist in holding the frame up.

Make sure that the uPVC hinges are open and closed in the right direction. You can check this by checking for the arrows on each hinge, this indicates which way the window should be opened.

The problem can be caused by opening the window improperly or by a poor installation in the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be happy to give you advice.

Regularly lubricating the hinges Repair My Windows And Doors is also necessary. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. This must be done at a minimum every year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. First, the hinges because of wear and tear, may become displaced, which will cause a gap to form where the sash meets the frame. If they are damaged beyond repair, it may be required to realign them. In addition, the interlock could be unbalanced. This is located on the hinge's side, and might require to be cleaned. In certain instances, it may be necessary to replace these.

The next most common reason for draughts is window seals. They are prone to wear or damaged over time and allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help prevent draughts. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will reduce the possibility of draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are typically made of fabric that are filled with some sort of filler and can be placed on top of your windowsill. They can help block out cold air and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and eventually, they will reach the point when it's more efficient to replace them than fix them. If you encounter any issues with your upvc window it is recommended to speak with an expert as soon as you can.